Changing to the 24-hour time mode, Attaching the lens hood, Attaching the wrist strap – Sharp VIEWCAM VL-NZ50U User Manual
Page 27: Using the lens cap
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing to the 24-hour Time
After performing step 8 above, press v
to select “12H/24H”, then press the
Press V or A to select “24H”, then
press the SET button.
Press the MENU button to turn off the
• The date and time, once set, are internally
recorded even when not displayed on the
• The menu screen automatically turns off if no
settings are made within five minutes.
Attaching the Lens
When recording outdoors on a sunny day or in
a location with bright lighting, attach the
supplied lens hood to the camcorder. Turn the
lens hood In the direction of the arrow to attach
Attaching the Wrist
Attach the wrist strap to the wrist strap loop as
Using the Lens Cap
Attach the strap to the lens cap as shown
Attach the strap of the lens cap to the wrist
strap as shown below.
To remove it, turn it in the opposite direction.
• The lens cap can still be attached on top of the
• Filters and other accessories cannot be attached
on the top of the lens hood.
(Continued on the next page)