Canon W8200 User Manual
Page 129
Replacing the Printhead
23
6-23
Caution
Important
10
Remove the old printhead.
z If you are removing the printhead immediately after printing, allow the
printhead to cool for a new minutes (the metal parts of the printhead
become extremely hot during printing). To avoid minor burns, do not touch
these metal parts when you remove the printhead.
z To avoid damaging the printer, never touch the electrical contacts on the carriage.
z Discard a used printhead in compliance with local regulations regarding the
disposal of such items.
11
Hold the new printhead by the grips (a) on both sides of the printhead
and remove it from its case. Remove the orange protective cap 1 (b),
then while pressing in on the grips (d) on both sides as shown in the
illustration, pull down to remove protective cap 2 (c).
a
b
c
d
d