Canon W8200 - Manual (Page 99)

Function Menus
7
5-7
Function Menus
This printer is provided with many built-in functions that can be set with the
operation panel. The menus allow you to make system and option settings,
clean the printhead, print test prints, and display information about the
printer settings.
Printer Function Priorities
If the setting is different for the same item in both the operation panel and the
printer driver, the printer driver setting has priority over the operation panel
setting.
Menu Flow Summaries
The printer operation panel menus are summarized in the flowchart below.
Use the arrow buttons to display the items on the menus.
or Press to move to the previous or next item on the same level.
Press to move to the next level below.
Press to return to the previous level above.
Enter Press to execute functions.
TMain Menu
Default G/W
Subnet Mask
IP Address
Information
Language
Ink Check Off
Error
MAC Address
Ext. Interface
Interface
RAM
Version
Ink
Nozzle Check
Status Print Nozzle Check
CutDustReduct.
Move Printer
Adjust Printer
Replace P. head
Sleep Timer
Buzzer
Head Cleaning B
Cutter
Test Print
System Setup
Interface Setup
Auto Cut
Rep. Ink Tank
Roll Media Type
Cut Sheet Type
Take-up Reel
Auto Feed
Print Pattern B
Print Pattern A
Auto Print
Force Cutting
Head Cleaning
MAIN MENU
Head Cleaning A
*2
*1
*3
*4
*2 Displayed when "Take-up Reel" is "Enable."
*1 Displayed for "Roll Media" when Cutter is "Enable."
*3 Displayed when using "Cut Sheet."
*4 Displayed when using "Roll Media."
EOP Timer
IP Setting