Canon W8200 - Manual (Page 175)

Replacing the Cutter Blade
43
7-43
Important
Important
3
Open the upper cover.
z To avoid soiling your hands or damaging the printer, never touch any part inside
the printer unless instructed to do so.
z If the cutting area is dirty, use a damp cloth to clean the cutter unit before starting
the procedure to replace the cutter blade.
4
While pinching the cutter blade at the grips, pull the cutter blade off
from the cutter unit.
z To avoid personal injury from a cut, never touch the blade (a) after removing the
cutter blade.
a