Canon W8200 - Manual (Page 44)

Print Media You Can Use
16
2-16
Important
16
Press or to select the setting for the type of roll media then press
Enter.
If the same type of roll media named in the message is already loaded, then
just press the Enter button.
The selection is prefixed with an equals sign (=) to indicate the roll media
type that is currently selected.
The table below lists the available settings for the Roll Media Type.
For Dye Ink
For Pigment Ink
Roll media starts to feed as soon as the type of media is selected.
After a few seconds, “Online” is displayed and the printer is ready to print.
z You must make the appropriate selection for the “Roll Media Type” setting. If the
“Roll Media Type” selection does not match the roll media loaded in the printer,
execute the procedures of “Selecting the Roll Media Type”. (
Æ P.2-18)
R o l l M e d i a T y p e
H e a v y C o a t e d
Media Name Roll Media Type Setting
Plain Paper Plain Paper
Coated Paper Coated Paper
Heavy Coated Paper Heavy Coated
Glossy Paper Glossy Paper
Photo Glossy Paper Photo Glossy
Photo Semi-Glossy Paper Photo Semi-Glos
Glossy Film Glossy Film
Back Print Film Back Print Film
Proofing Paper Proofing Paper
— Special 1 to 5
Media Name Roll Media Type Setting
Heavy Coated Paper Heavy Coated
Photo Glossy Paper Photo Glossy
Photo Semi-Glossy Paper Photo Semi-Glos
Synthetic Paper (Non-Adhesive) Syn. Paper
Synthetic Paper (Adhesive) Adh. Syn. Paper
Back Light Film Back Light Film
Flame-Resistant Cloth Flame-Res.Cloth
— Special 1 to 5