Tuning stations automatically, Tuning stations manually – Kenwood 855 AV User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tuning stations automatically
You can automatically find the strongest radio station
signals.
...
1 Select the TUNER input,
2 Press the BAND.buttonl to select FM or AM.
3 Press the AUTO/MANU button' to select AUTO...
The AUTO'light turns ON. ■
4 On the TUNING buttons, press ▲ to move up the. .
broadcast band, or T to move down the broadcast
band.
The tuner stops automatically when it finds a strong
station, and the TUNED light turns ON. If the station
is broadcasting in stereo, the STEREO light turns ON.
5 Press
A
or ,T again to find the next strong signal.
:0.
Tuning stations manually
You can search for radio stations .in small steps up and
down the broadcast band to tune in a weak station that,
automatic tuning might miss.'
1 Select the TUNER input. ,
2 Press the BAND button to select FM or AM.
3 Press the AUTO/MANU button to select MANUAL
The AUTO light turns OFF.’ ’
4 On the TUNING buttons, press
A
to move up the
broadcast band, or T to. move down the' broadcast
band to the station you want
The frequency changes by 0.1 MHz (FM) or 10 kHz
(AM) each time you press the button, or it continually
changes if you hold the button down. .
■o
;ant:
nanual tuning, the tuner receives stations
s^tbn in stereo, press the
button so the .AUTO, light turns
L^Uojils broadcast in stereo, you
ons will be received with more
ошК,^^еТп\1егео than in mono. To
K^seTnehoise,
pre^the
AUTO/MANU
'
^ ^ ~
"^~^"~^Oj£ht goes OFF.
20.