Kenwood 855 AV User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording from a CD (with automatic start and stop)
You can tape autonnatjcally without cutting off the. first,
few seconds of sound—^the CD player and tape deck
start and stop simultaneously. This method lets you set
the recording level to your lildng.
1 Put a blank tape in tape well B,
2
Set the recording level.and recording balance (see.
page 40).
.
.
3 ■ Select the.tape, direction ◄ or.^, and immediately
press the STOP button.
4 Select the recording mode:
, .
.
...
> ) records on both sides offthe tape.
^
____ records on one side-of the tape,
5 Select the Dolby Noise Reduction mode. , .
:
6 Press the REC PAUSE button., . ■ , .
7 Press the PLAY/PAUSE.buttpn on the CD player. ■
Recording begins when you push the button.
When the CD. stops, the'recording stops, and the
player stops,
To pause the recording
Press the PD\Y/PAUSE button on the. CD player. You ,
can skip to another tr^ck
. .
To resume recording
Press the PLAY/PAUS'E button on the CD player again.
To stop recording
Press the STOP button on the CD player.
If you press the .■ button on the cassette deck recording
stops, but the CD player keeps playing. ;
43.