Kenwood 855 AV - Manual (Page 46)

Using a timer to record from
the tuner
You can set the cassette deck to recond^frojri the tuner^
at a preset time (to record a specific radio shoviC for
example).
1 Connect the power cords of the Spectrum systern to
the audio timer so that the timer turns th^ system ,
ON. Follow the instructions included with the timer. ;
2 Turn the, system ON. ,
3 Tune in the. radio station.
4 Ins.ert a blank tape in tape well B.
5 Set the recording mode. Dolby Noise Reduction, and
adjust the recording level. Make sure you're selected.
TUNER on the integrated amplifier.,
6 Set the timer. ^ y
7 Set the TIMER switch on the.cassette deck to RFC h
To ensure that the.cassette deck‘s automatic shgtpff ,
wori<s properly, set the timer tq operate fpr a little
longer than the length of the tape.
Recording from a record
(with automatic start and stop)
You can make tapes from your records if you have a
Kenwood.turntable conne.cted to your Spectrum' system ,
with a system control cable. The record and tape deck
will start and stop simultaneously.
1 Put a blank tape in tape well B.
2 Select the tape direction ^ or ►.
3 Immediately press the STOP. button. . - ;
4 Select the recording mode:
) records on both sides, of the tape.
^ ____ - records on one. side of the tape.
5 Select the Dolby. Noise Reduction mode,
6 Adjust the'recording level according to the instruc­
tions in 'Setting the recording level and. balance’ on
page 40. . .
46.