Toshiba KV-6200A - Manual (Page 12)

CÖNTENt^FcSÖREiN
The settings such as date-time display are set in four screens.
The menus and the setting items are listed below.
Press the DISPLAY button and use the SHIFT button to cause the menu to blink. Then press the SET button.
To return to the initial screen press the DISPLAY button.
Monitor Screen flnttlal screen) MENU Screen (initial screen) CLOCK SET Screen
Monitor Screen (normal screen) MENU Screen (normal screen)
4/ 1/93 THU
17:30:02 A 2
I CLOCK AOJuTn
SETUP
DISPLAY MODE
PROGRAM
EN0-[DISPLAY]
CLOCK ADJUST Screen
ri.o:;K A D J U b i
iMONTH) (DAY) (YEAR)
4 / 1 / '93
THE
(TIME) 17:30
MENU-COISPLAY]
Comment
Setdng of clock.
Unless the date-time Is
adjusted, the "PROGRAM"
will not appear on the MENU
screen.
Correction of date-time.
SETUP Screen
CLOCK ADJUST
I SETUP I
DISPLAY MODE
PROGRAM
EM0-[DISPLAY]
CLOCK ADJUST
SETUP
I DISPLAY HODEl
PROGRAM
E»D-[01SPLAY1
ALARM REC TIME 15S
SPEED A 2H
ISHOT REC FIELD IF
INTERVAL 0.2S
RESTART REC OFF
TAPE END MODE STOP
ALARM STOP
MENU-CDISPLAY]
DISPLAY Screm
(DATE) ON
(DAY of the WEEK) ON
(TIME) ON
(SPEED) ON
(VCR) OFF
(ALARM) OH
(12H/24H) 24H
(CHAR.LINES) 6
MENU-CDISPLAY]
Setting of alarm recording
r e a
ng f
Setting of One-shot recording
og
mode (recording time.
. 9 ’
recording mode)
ig of One-sh
mode (number of recording
fields, recording intervals).
Setting of recoraing for
restoratkin of power following
a power failure.
Setting of operation after
detecuon or tape end (tape
end detection mode for tape
end detection during
recording and when an alarm
recording is made).
Set&ng of display screen
(date, day of week, time,
recording time, VCR number,
alarm).
Setting of time display (24H,
12H).
CLOCK ADJUST
SETUP
DISPLAY MODE
I PROGRAM I
END-C01SPLAY]
PROGRAM Screen
MON ON
TUE ON
NED ON
THU ON
FRI ON
SAT ON
SUN ON
DLY ON
-- 120H
-- 120H
- L20H
- 120H
- 120H
- 120H
- 12DH
- 120H
MEHU-CDISPLAY]
Setting of timer recording.
11