Toshiba KV-6200A User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the Alarm Terminals
Connecting the ALARM IN/OUT terminals
• When the alarm switch Is ON, an alarm recoiling starts. It is possible to confirm the warning from outside by connecting a
lamp or a buzzer to the alarm output.
Connecting alarm reset input
Alarm reset switch
> When the alarm switch is ON, the alarm recording starts. However, when the alarm reset switch is turned ON after starting, the
al^m recording is released and the unit returns to the original condition of time-lapse recording.
Note:
When simultaneously connecting alarm input and alarm reset input, be sure to carefully check the voltage levels of them.
29