Tape remain, Error message – Toshiba KV-6200A User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Tape Remain

When the TAPE REMAIN button is depressed during recording or playback, the counter display changes to the remaining tape
display. The remaining time is the approximate time to tape end when operating the unit in the A2-hour mode.

¡ H 3 Ü

n

I*

n

C

TAPE

REMAM

• The remaining time is the approximate remaining time.
• Displays the remaining tape time in ttie A2-hour mode.

During computation of the remaining time, the following display appears.

g a

H

( ------1

► r ______r

R г

• When ^ unit has been used in the recording mode over a long period, it may take considerable time for computation. When

operating at fast speed in the A2-hour mode, the computation is faster.

Nota:----------------------------------------------------------------------------------------------------------------------------------------

it is possible to compute the remaining time forT-120, T-90, T-60 and T-30 tape. The display will not be correct for other kinds of
tape.

Error Message

When an abnoimality occurs during operation, the error code is displayed.
At the same time, a signal is output to the buzzer output terminal.

£ - Í

R

Í

Code Number

Condition of Abnormality

E-1

Abnormality on reel rotation during tape running.

E-3

Abnormality on cylinder rotation during recording and playback.

E-4

Abnormality on tape loading mechanism.

E-5

Video tape is broken.

E-6

Video heads are dogged.

E-8

Dew condensation.

>

When the error code "E-1" to "E-4* are displayed, consult with your dealer.

' When the error code "E-5" is displayed, the tape is broken. Replace with a

new tape.

>

Regarding the error code "E-6“ Display

When recording in time mode between 48 and 960 hours or in the One-shot
mode, video head clog detection is automatically carried out once for every
three minutes. When the video head dog is found, head cleaning is carried
out for ^proximately 10 times. When cleaning is still not possible. "E-6‘ is

displayed and the RED display blinks on the monitor although recording
continues. In such a case, cleaning of the wdeo heads is required.

17

Advertising