Toshiba KV-6200A - Manual (Page 32)

Operations that will be made after tape reaches its end can be selected as follows.
How to Set
Press the DISPLAY
button.
OBW SHFT
IttAttN S
-S£T +
^ G B G G
CLOCK ADJUST
SETUP
DISPLAY MODE
PROGRAM
ENO-tOISPLAY]
Press the or ►
SHIFT button to make
SETUP blink and press
the -I- SET button.
¡»MAY SHFT
UOttOlS&ECr
-SCT +
□ 0 ^ G ! J
CLOCK ADJUST
I SETUP I
DISPLAY MODE
PROGRAM
EN0-[01 SPLAY]
Press the -1 or »•
SHIFT button to make
TAPE END MODE blink.
OtiRAY SHFT -ЖТ+
□ G G
ALARM REC TIME ISS
SPEED A 2H
ISHOT REC FIELD IF
INTERVAL 0.2S
RESTART REC OFF
TAPE END MODE I stop I
ALARM STOP
MENU-[DISPLAY]
Press the + or - SET
button to set the opera­
tion after detection of
tape end.
OCPIAY ЗНГГ
lOOtTOhSElfCr
О 0 0 Р | Р
ALARM REC TIME 15S
SPEED A 2tt
ISHOT REC FIELD IF
INTERVAL 0.2S
RESTART REC OFF
TAPE END MODE ISTOPI
ALARM STOP
MENU-t01SPLAY]
Each time pressing the + SET button, the display changes
as follows.
STOP (REW STOP) (REW -> REC)
t___________________________ I
Each time pressing the - SET button, the display changes
in the reverse order.
Display Operation after detection of tape end
STOP Stops at tape end.
REW STOP Rewinds to beginning of tape and stops.
REW REC Set to carry out repeat recording.
Rewinds to beginning of tape and records.
Note:'
The^uzzer, screen display and counter displays operate as follows depending on the setting for operations after detection of
the tape end.
Setting contents Buzzer Screen display Counter display
STOP Buzzer sounds at tape end TAPE END blinks Counter display blinks
REW ^ STOP Buzzer sounds at tape end TAPE END blinks Counter display blinks
REW ^ REC
_____------ _____----------
31