Comtrol DM ATS-XPe - Manual (Page 11)

Installation and Setup 11
Changing the Default Computer and Workgroup Names
Changing the Default Computer and Workgroup Names
If you plan on installing more than one ATS-XPE on your network, you must
change the default computer name.
1. Right-click My Computer, select Properties and the Computer Name tab.
2. Select the Change button and enter the
new computer name.
Note: Use standard characters (A-Z, a-z),
digits (0-9), and hyphens. Using
non-standard characters may
prevent other users from locating
this system unless the network is
using the Microsoft DNS Server.