Certified pcmcia adapters, Comtrol certified pcmcia devices, Linksys wireless pc card (wpc11) – Comtrol DM ATS-XPe User Manual
Page 43
Certified PCMCIA Adapters
43
Certified PCMCIA Adapters
This section discusses configuration issues for Comtrol certified PCMCIA options.
Comtrol Certified PCMCIA Devices
The ATS-XPE supports the following PCMCIA devices.
•
Any standard PCMCIA to Compact Flash adapter
•
Linksys Wireless PC Card (WPC11)
•
Linksys EtherFast 10/100 + 56K Modem PC Card (PCMLM56)
Note: The ATS-XPE PCMCIA option supports two Type II PCMCIA slots or one
Type III slot, which is installed at the factory. Drivers for Comtrol approved
PCMCIA devices are installed in the system.
Linksys Wireless PC Card (WPC11)
The device driver for the Linksys Wireless PC Card (WPC11) is installed on the
ATS-XPE. To configure the Linksys Ethernet card, it is necessary to have a
configured and operating wireless access point connected to the local network and
have it situated within range of the wireless adapter (preferably less than 100 feet
indoors with no obstructions).
For support of the
.
1.
Select Install from a specific list or specific location (Advanced) and Next.