Standard cmos setup, Bios features setup, Standard cmos setup bios features setup – Comtrol DM ATS-XPe User Manual
Page 84
84
Appendix D. Changing BIOS Configuration
Standard CMOS Setup
Standard CMOS Setup
The Standard CMOS Setup screen is used for basic hardware system configuration,
such as the Date and Time settings.
This figure illustrates the DeviceMaster ATS-XPE factory defaults.
Use the following procedure to change the system date.
1.
Press either the Arrow or <Enter> key on your keyboard to select one of the
fields (Month, Date or Year).
2.
Press either <PgUp> or <PgDn> to increase or decrease the value of that field.
3.
Use the same key sequence to change the time setting.
BIOS Features Setup
The BIOS Features Setup screen is designed for fine-tuning your system and
improving its performance. Typically, you do not have to change the default
settings, which are pre-set for the most reliable operation.
This figure illustrates the DeviceMaster ATS-XPE factory defaults.