Haltech E6A - Manual (Page 31)

31
NOTE: If power is removed or the communication cable is disconnected or interfered with,
the following message will be displayed on the computer screen.
RECONNECT HALTECH
If this message appears check all connections and ensure that the communications cable is not
being interfered with. Also be sure that the Haltech E6A unit is receiving power. (i.e.. ignition
switch is turned "on".)
2.5 The Main Menu
When you select Online or Offline mode the Haltech MAIN MENU bar appears. This menu
bar allows access to submenus giving access to maps, file storage/retrieval, engine data and
options.
2.6 How to Quit
Throughout the program you can exit from any application by using the menu bars or hot keys.
Pressing
§q §q
in any page will prompt you to exit the program (i.e.. pressing
q q
while
holding down the
§ §
key).If you wish to exit
Y Y
press at the prompt.
2.7 Checking the Engine Data
The engine data option can only be used when the system is Online. This function allows all of
the engine data variables to be displayed on the screen
This is a very useful function for analysing the engine sensors. To bring up the engine data
press
§e §e
from any application. Otherwise it can be accessed through the menu bar by
pressing
¦O ¦O
and then
E E
for Engine Data.
Do not attempt start the engine if the Engine Identification has not been set up. Before
continuing check to see if all the sensors are operating correctly by viewing the engine data
page.