Haltech E6A - Manual (Page 73)

73
SECTION FOUR
E6A Optional Outputs
Chapter 13
Software Access
13.1 The Output Options Page
The Output Options Page is where all E6A options are enabled/disabled and programmed. This
page may be accessed in either Online or Offline mode. Remember that any changes you make
in Offline mode will not affect the ECU.
Pressing
¦o ¦o
will take you to the Options Menu. Press
O O
to go to the Output Options
Page. Alternatively use the
§o §o
hot key combination
Here, the four E6A options are shown in four windows. Current settings are displayed for each
of the options. Use the left and right arrow keys to highlight the function you are interested in.
In the case of selecting the Auxiliary Outputs, use
© ©
to cycle through the functions, and
press
¬ ¬
to select the one you want. Although any channel may perform any function, each
function may be selected only once. Some options cannot be used together because they use
the same hardware. These are noted in there detailed descriptions in Chapter 16. Other
restrictions apply when using the Advanced Mode. If you are using this mode, consult
Appendix B for details on these restrictions.
To adjust the parameters of the Idle Speed Control or the Closed Loop Control functions, hit
¬ ¬
when that function is highlighted. In the case of the three Auxiliary Outputs, highlight the
channel, then use the up and down arrows to move through its parameters. Strike
¬ ¬
if you
wish to make a change. Some functions have maps associated with them, which are accessed
through their Options' windows.
A keystroke guide is available at the bottom of the screen. Further, a simple Help window may
be opened by pressing
¦H ¦H
. This will describe the function you are currently looking at, and
offer some explanation as to how its parameters are to be used.