Haltech E6A - Manual (Page 93)

93
SECTION FIVE
Appendices
Appendix A
Troubleshooting
This Appendix is devoted to trouble shooting problems that may occur during setting up the
E6A on your engine. To use this Appendix, firstly identify the closest symptom or symptoms
from the list below, and then follow the checklist for possible solutions.
A.1 Overview
Control Programme Problems
•
The Haltech Programming Software will not load up
•
The Haltech Programming Software will not operate in Online mode.
•
The Engine Data Page is displaying unusual sensor readings
Starting Problems
•
Fuel Pump does not prime when ignition switched on.
•
The engine makes no attempt to start
Idling Problems
•
The engine will not idle when cold
•
The engine idles too slow
•
The engine idles too fast
•
The engine surges at idle
Light Throttle and Cruising Problems
•
Engine will not run at light throttle
Full Power Problems
•
Engine dies under full throttle
•
Engine surges under full throttle
•
Engine lacks power at full throttle
Throttle Response Problems
•
Poor throttle response
•
Poor throttle response when cold
Cold running problems
•
Engine runs poorly when cold