HONDA 2007 Accord Coupe - Owner's Manual - Manual (Page 122)

Select the fan speed by pressing the
A/C button to view the display, then
press any of the fan control icons.
Press these buttons ( or ) to the
desired temperature. The
temperature setting is shown in the
upper display.
Press the DUAL button to select
dual temperature control mode (see
page
).
When the recirculation indicator is
on, air from the vehicle’s interior is
sent throughout the system again.
When the indicator is off, air is
brought in from the outside of the
vehicle (fresh air mode).
The outside air intakes for the
heating and cooling system are at
the base of the windshield. Keep this
area clear of leaves and other debris.
The system should be left in fresh
air mode under almost all conditions.
Keeping the system in recirculation
mode, particularly with the A/C off,
can cause the windows to fog up.
Switch to recirculation mode when
driving through dusty or smoky
conditions, then return to fresh air
mode.
The driver and passenger can select
independent temperature settings.
Press the A/C button to view the
display. Touching ON or OFF in the
display turns the air conditioning on
and off. You will see A/C ON or A/C
OFF in the display.
When you turn the A/C off, the
system cannot regulate the inside
temperature if you set the
temperature control buttons below
the outside temperature.
When you press the DUAL button
again (indicator turns off), both
sides adjust to the driver’s side
temperature.
121
Climate Control System
Fan Control
Temperature Control Buttons
Dual Button Recirculation Button
Air Conditioning (A/C) Button/
Icons
Fe
a
tu
re
s
119
Main Menu Table of Contents s t Main Menu s t Table of Contents