Homelink universal transceiver – HONDA 2007 Accord Coupe - Owner's Manual User Manual

Page 181

Advertising
background image

If you are training HomeLink to
operate a garage door or gate, you
should unplug the motor for that
device during training. Repeatedly
pressing the remote control button
could burn out the motor.

They do not have the safety feature
that causes the motor to stop and
reverse if an obstacle is detected
during closing, increasing the risk of
injury.

HomeLink stores the code in a
permanent memory. There should
be no need to retrain HomeLink if
your vehicle’s battery goes dead or is
disconnected. If your garage door
opener was manufactured before
April 1982, you may not be able to
program HomeLink to operate it.

The HomeLink universal
transceiver built into your vehicle
can be programmed to operate up to
three remotely controlled devices
around your home, such as garage
doors, lighting, or home security
systems.

For quick and accurate training,
make sure the remote transmitter
for the device (garage door,
automatic gate, security system, etc.)
has a fresh battery.

If you just

received your vehicle and have not
trained any of the buttons in
HomeLink before, you should erase
any previously learned codes before
training the first button.

If you are training the second or
third buttons, go directly to step

1

.

Unplug the garage door opener
motor from the electrical outlet.

Hold the end of the garage door
opener remote

2

to 5 inches from

HomeLink. Make sure you are not

blocking your view of the red
indicator in HomeLink.

Always refer to the operating
instructions and safety information
that came with your garage door
opener or other equipment you
intend to operate with HomeLink. If
you do not have this information,
contact the manufacturer of the
equipment.

To do this, press and hold the two
outside buttons on the HomeLink
transceiver for about 20 seconds,
until the red indicator flashes.

2

.

1

.

On EX-V6 model

General Inf ormation

Important Saf ety Precautions

Training HomeLink

Bef ore you begin

HomeLink Universal Transceiver

178

step

1

.

Release the buttons, then go to

Main Menu

Table of Contents

s

t

Main Menu

s

t

Table of Contents

Advertising