HONDA 2007 Accord Coupe - Owner's Manual - Manual (Page 165)

Dolby noise reduction is manufactured under
license from Dolby Laboratories Licensing
Corporation. ‘‘DOLBY’’ and the double-D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
To remove the tape, press the eject
button on the tape player. If you
want to turn the player off, press the
PWR/VOL knob or turn off the
ignition. The tape will remain in the
drive. When you turn the system
back on, the tape will be in pause
mode. Touch the PLAY/PROG icon. To fast forward the
tape, push the upper side ( ) of the
CH/DISC bar. You will see FF in the
upper display. To rewind the tape,
push the lower side (
) of the CH/
DISC bar. You will see REW
displayed. Press either side of the
CH/DISC bar or touch the FF, REW
or PLAY/PROG icon to take the
system out of rewind or fast forward.
Dolby noise reduction comes on
when you insert a tape. The NR
indicator in the display also comes
on. If the tape was not recorded in
Dolby, turn it off by touching the NR
icon. Dolby remains off until you
touch the NR icon again.
To switch to the AM/FM radio,
satellite radio (U.S. models), or CD
changer while a tape is playing, press
the AM/FM or CD/AUX/XM button
(CD/AUX button on Canadian
models). To change back to the tape
player, push the CD/AUX/XM or
CD/AUX button.
First push the AUDIO button before
selecting any of the audio icons on
the audio screen.
AM/FM/CD Changer
To Stop Playing a Tape Tape Search Functions
FF/REW
162
Main Menu Table of Contents s t Main Menu s t Table of Contents