HONDA 2007 Accord Coupe - Owner's Manual - Manual (Page 131)

If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
You will see a ‘‘0’’ displayed after
pressing a preset bar if auto select
cannot find a strong station for every
preset bar.
, press the
A. SEL (auto select) button. This
restores the presets you originally
set.
Press the A. SEL button. ‘‘A.SEL’’
flashes in the display, and the system
goes into scan mode for several
seconds. It stores the frequencies of
six AM, and twelve FM stations in
the preset bars.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset bars
as previously described.
Press the SOUND button repeatedly
to display the bass (BAS), treble
(TRE), fader (FAD), and balance
(BAL) settings.
The system will return to the audio
display about 5 seconds after you
stop adjusting a mode.
Adjusts the bass.
Adjusts the treble.
Adjusts the fader, or the
front-to-back strength of the sound.
Adjusts the balance, or side-
to-side strength of the sound.
Each mode is shown in the display as
it changes. Turn the AUDIO PWR
knob to adjust the setting to your
liking. When the level reaches the
center, you will see a ‘‘
’’ in the
display.
To turn off auto select
AUTO SELECT Adjusting the Sound
BAS
TRE
FAD
BAL
AM/FM/CD Player
128
Main Menu Table of Contents s t Main Menu s t Table of Contents