HONDA 2007 Accord Coupe - Owner's Manual - Manual (Page 157)

Each preset icon can store
one channel in XM1 and one in XM2.
Pick a preset icon, and hold it until
you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on XM1 and
six on XM2.
The
seek/skip function selects the
various categories in XM, such as
Jazz/Blues, Rock, Classical, etc.
Push the
to change the
category forward. Push the to
change the category backward. To
search for channels within a
category, turn the TUNE knob
clockwise.
Once your XM channels are preset,
pressing either side of the CH/DISC
bar will select your preset channels.
When in the satellite radio mode,
you can use any of four methods to
find channels: TUNE, SEEK/SKIP
(CATEGORY), SCAN, and the
preset icons.
Turn the TUNE knob to change
channels. Turn the knob right for
higher numbered channels and left
for lower numbered channels.
Push the CD/AUX/XM button.
(You will see XM1 or XM2.)
To switch between
channel mode and category mode,
touch the MODE icon.
The scan function samples
all channels for 5 seconds. To
activate the function, push the SCAN
button. Push it again to get out of the
sequence.
Use the tune, seek, or scan
function to tune the radio to a
desired station.
1 .
2 .
3 .
4 .
Preset SEEK/SKIP (CATEGORY) To Select a Channel
TUNE
MODE
SCAN
AM/FM/CD Changer
154
Main Menu Table of Contents s t Main Menu s t Table of Contents