IC Realtime 1/2/4 Channel H.264 Network Video Server - Manual (Page 28)

22
Please note the activation snapshot has the higher priority than schedule snapshot. If you
have enabled these two types at the same time, system can activate the activation snapshot
when an alarm occurs, and otherwise system just operates the schedule snapshot.
4.4 Network
Here is for you to input network information. See Figure 4-7.
 IP address: Here you can input IP address.
 DHCP: It is to auto search IP. When enable DHCP function, you can not modify IP/Subnet
mask /Gateway. These values are from DHCP function. If you have not enabled DHCP
function, IP/Subnet mask/Gateway display as zero. You need to disable DHCP function to
view current IP information. Besides, when PPPoE is operating, you can not modify
IP/Subnet mask /Gateway.
 TCP port: Default value is 37777. You can modify if necessary.
 UDP port: Default value is 37778. You can modify if necessary.
 HTTP port: Default value is 80.
 Max connection: system support maximal 20 users. 0 means there is no connection limit.
 Preferred DNS: DNS IP address.
 Alternate DNS: DNS alternative IP address.
 Transfer mode: Here you can select the priority between fluency/video qualities.
 LAN download: System can process the downloaded data first if you enable this function.
The download speed is 1.5X or 2.0X of the normal speed.
After completing all the setups please click save button, system goes back to the previous menu.
Figure 4-7
4.4.1 Advanced Setup