IC Realtime 1/2/4 Channel H.264 Network Video Server - Manual (Page 52)

46
Figure 5-30
Please refer to the following sheet for detailed information.
Parameter Function
Channel
Please select a channel first.
Pre-record Please input pre-record value here.
System can record the three to five seconds video before activating
the record operation into the file. (Depends on data size).
Setup  In
X458H 458H 458H
Figure 5-29, click set button, you can go to the corresponding
setup interface. See Figure 5-30.
 Please set schedule period and then select corresponding record
or snapshot type: schedule/snapshot, motion detection/snapshot,
and alarm/snapshot.
 Please select date (Current setup applies to current day by default.
You can draw a circle before the week to apply the setup to the
whole week.)
 After complete setup, please go back to
X459H 459H 459H
Figure 5-29
X
and then
click save to save current time period setup.
Copy It is a shortcut menu button. You can copy current channel setup to
one or more (all) channels. The interface is shown as in Figure
5-28
X
.
Save You can click save button after you complete setup for one channel,
or you can complete the whole setups and then click save button.
Refresh Click this button to get device latest configuration information.
5.3.2.4 Network
Network interface is shown as in Figure 5-31.