IC Realtime 1/2/4 Channel H.264 Network Video Server - Manual (Page 37)

31
5 WEB OPERATION
Important
Slight difference may be found in the interface. All the interfaces listed below are based on the 4-
channel series product.
5.1 Network Connection
Before web operation, please check the following items:
 Network connection is right
 NVS and PC network setup is right. Please refer to network setup(main menu->setting-
>network)
 Use order ping ***.***.***.***(* NVSIP address) to check connection is OK or not. Usually the
return TTL value should be less than 255.
 Open the IE and then input NVSIP address.
 System can automatically download latest web control and the new version can overwrite
the previous one.
 If you want to un-install the web control, please run uninstall webrec2.0.bat. Or you can go to
C:\Program Files\webrec to remove single folder. Please note, before you un-install, please
close all web pages, otherwise the un-installation might result in error.
5.2 Login
Open IE and input NVS address in the address column. For example, if your NVS IP is
10.10.3.16, then please input http:// 10.10.3.16 in IE address column. See Figure 5-1.
Figure 5-1
System pops up warning information to ask you whether install webrec.cab control or not. Please
click yes button.
If you can’t download the ActiveX file, please modify your settings as follows. See Figure 5-2.
Input your IP
address here.