Interlogix KTD-400 - Manual (Page 20)

KTD-400 Controller Keypad
User Manual
16
Site select keys
Multiplexer function keys
The following keys may function differently, or not at all, on some models of multiplexers.
0 to 9 Numerical keys are used for camera and monitor selection in Digiplex operation mode, or camera and
multiplexer selection in multiplexer operation. Also used for preset position selection when applicable.
Clear Refreshes the alphanumeric display on the selected monitor. Also used to clear infinite alarms using
numerical keys.
Set Used in combination with a numerical key (0 through 9) to find preset positions. Also used with Auto to
engage the preset tour mode.
Mode Toggles the keypad between DigiPlex, multiplexer, and VCR control modes.
Run Selects automatic switching of videos in lower right window of the current view; also used in setup of
motion detection areas.
Sel Used to select an active multiplexer or VCR.
Zoom Toggles between a full screen view and a 2x view of the selected video, if available on the specific
multiplexer.
Live Used to view the live video inputs in any display mode; also used during setup of motion detection
areas.
VCR Selects VCR output for monitoring during taping or VCR input for viewing during playback. Also used in
setup of motion detection areas.
Full Used by some multiplexer types to restore full view.
View Toggles between selected views.
Fn Reserved for future development.