Back panel connections, Ktd-405/ktd-405-2d connections – Interlogix KTD-405 Series User Manual User Manual
Page 14
Advertising
KTD-405/KTD-405A/KTD-405-2D Controller Keypad
User Manual
10
Back panel connections
KTD-405/KTD-405-2D connections
Adhere to all installation guidelines while making connections, including your local codes and those provided
in
Figure 5. KTD-405/KTD-405-2D back panel connections
RS-232 programming port (future use)
RJ45 control cable (GE equipment
uses two different RJ45 cables. You
must use the RJ45 cable provided
with the unit.)
I/O box
RS-485 and RS-422 in/out
Power supply
RS-485 termination switch
Power cord
A
D
E
B
F
C
G
Advertising