Interlogix KTD-405 Series User Manual - Manual (Page 54)

KTD-405/KTD-405A/KTD-405-2D Controller Keypad
User Manual
50
To enter a Calibur DVMRe/multiplexer’s programming menus, do the following:
1. Enter the remote programming mode:
a. Press and hold .
b. Press 9-5-1-seq.
2. Select 1, switcher/multiplexer.
3. Select 2, Calibur.
4. Enter the Calibur address.
5. Press .
6. Enter the Calibur password.
To navigate the DVMRe/multiplexer programming menus, see Table 6.
Table 6. Navigating Calibur menu
Control Function
Joystick moves left and right within menu options; can be used to move up and down within the menu options
makes selections
backspaces out of selections; exits the programming menus if pressed in the main menu
moves up within menu options
moves down within menu options
moves right within menu options
moves left within menu options
interchangeable with
esc interchangeable with