Casio IT-2000D User Manual
Page 161
161
Readout from Key Buffer
Acquires a key code or coordinates which have been acquired from the key buffer. If the buffer
contains neither a key code nor coordinates, NO_DATA will be returned. However, coordinate
values can be returned only if the coordinates input mode is set to “enable”.
SYNTAX
int KEY_Read (unsigned int *Keycode, KDC_POSINFO *Position);
INPUT
Keycode = Pointer to the area in which the read key code is stored
Position = Pointer to the KDC_POSINFO structure in which the read coordinates
are stored
typedef struct{
int status; /*status
*0
: DOWN_STATUS
*1
: RUN_STATUS
*2
: UP_STATUS
*3
: CANSEL_STATUS
This status arises when the power is off after the down
status is acquired and before the up status is acquired.
*/
int xpos; /* X coordinate */
int ypos; /* Y coordinate */
}KDC_POSINFO;
OUTPUT
= KDC_NONE (0)
No data
= KDC_KEYCODE (1)
A key code is present
= KDC_POSDATA (2)
Coordinates are present
EXAMPLE
#include "padlib.h"
unsigned int Keycode;
POSITION Position;
int retcode;
retcode = KEY_Read (&Keycode,&Position);