Casio IT-2000D - Manual (Page 207)

207
Termination Codes and Messages
In the following table, termination codes and their error messages returned by FLINK.EXE
are described.
Error Code Error Message Description
Category
(High)
Detail
(Low)
Normal End
0x00 0x00 NORMAL ENDING Normal end.
0xDC 0x00 A

ZDRIVE FORMAT NOTICE Format notification of drives A to Z.
0xF6 0x00 POWER OFF ENDING NOTICE Notification of the end of the power.
0xF7 0x00 RESET ENDING NOTICE Notification of the end of reset.
0xF8 0x00 BREAK KEY INTERRUPT ENDING Notification of abortion by user.
Protocol Error
0x01 0x00 COMMAND ERROR Command error (undefined function
code)
0x01 0x01 COMMAND ERROR Command error (undefined sub-
function code)
0x01 0x02 COMMAND ERROR Command cannot be executed.
0x01 0x03 CHECK SUM ERROR Check-sum error
0x01 0x04 COMMAND SEQUENCE ERROR Command sequence error.
0x01 0x05 SEQUENCE NUMBER ERROR Sequence number error.
0x01 0x06 OTHER PROTOCOL ERROR Protocol is illegal.
0x01 0x07 PARAMETER ERROR Parameter error.
0x01 0x08 TIMEOUT ERROR Timeout error.
File Error (INT21h)
0x02 0x02 FILE NOT FOUND File cannot be found.
0x02 0x03 PATH NOT FOUND Path cannot be found.
0x02 0x0B INVALID FORMAT Invalid formatting.
0x02 0x0F INVALID DISK DRIVE Invalid disk.
0x02 0x10 CANNOT DELETE DIRECTORY Delete request is specified to current
directory.
0x02 0x11 NOT SAME DISK Disk is not the same.
0x02 0x12 FILE NOTHING File cannot be found.
Note:
Besides the detail codes which are defined in File Error (INT21h) above, other error codes may be
returned as extension error code of DOS.
File Error (INT24h)
0x03 0x13 WRITE PROTECT ERROR Write protect error.
0x03 0x14 UNKNOWN UNIT Undefined unit.
0x03 0x15 DRIVE NOT READY Drive is not ready.
0x03 0x17 DATA ERROR (CRC) Data error.
0x03 0x19 SEEK ERROR Seek error.
0x03 0x1A UNKNOWN DISK FORMAT Disk is not formatted.
0x03 0x1B SECTOR NOT FOUND Sector cannot be found.
0x03 0x1D WRITE ERROR Write error.
0x03 0x1E READ ERROR Read error.
0x03 0x1F UNKNOWN ERROR Error cannot be defined.
0x03 0x20 FILE SHARE ERROR Specified file is already opened.
0x03 0x21 FILE LOCK ERROR File lock error.
0x03 0x22 INVALID DISK CHANGED Invalid disk exchange.
0x03 0x23 FCB FULL FCB is full.
0x03 0x53 FATAL ERROR Fatal error (Unsuccess INT24h).