Casio IT-2000D User Manual
Page 221
221
Refer to ATA Driver Modes section which follows.
Card Service Power Management Enabler (CS_APM.EXE)
CS_APM.EXE is a DOS-based background task that enables Card Services to process system power
management Suspend/Resume requests. When a Suspend request is initiated by system power
management software, CS_APM notifies Card Services, which then verifies that the system
PCMCIA slots are idle, and can be powered down. Card Services then passes this information back
to CS_APM, which then notifies the power management software that the sockets can be powered
off. When a Resume request is received by CS_APM, it informs Card Services, which then powers
the sockets on again.
Memory Technology Driver (MTDDRV.EXE)
This component must be installed in order to support all Memory cards. It works in conjunction with
card-specific MTDs to support a wide variety of current Flash Memory cards. It also supports
SRAM cards (providing MTSRAM.EXE is also installed), and allows sharing of drive letters
between the different types of memory cards (Flash, SRAM, and ATA).
SSVCD.386(SSVCD311.386 for Windows for Workgroups), SSVRDD.386,
PCCARD.386 (for IT-2000W only)
These drivers permit hot insertion/removal of communications I/O, memory, and removable drive
cards within Windows. These files are stored in the directory,
E:
Windows
.