CMC electronic MAI085MB - Manual (Page 30)

mAI085-MB Actuator Interface Technical Manual /26
Distributive Intelligence
 CMC INDUSTRIAL ELECTRONICS LTD
Name Description
Output 3
Pins 5 & 6 This output will be energized any time all of the actuator setpoints are 0. The
output de-energizes whenever a non-zero setpoint is entered into any of the
actuators.
Output 4
Pins 7 & 8 This output is energized whenever an internal fault is detected in the mAI085-MB
Actuator Interface. Possible faults are invalid parameter table (checksum
verification failed during startup), corrupted firmware or damaged hardware.
***************************** WARNING ********************************************
Operation of the mAI085-MB Actuator Interface may be unpredictable when
this contact is energized.
*****************************************************************************************