CMC electronic MAI085MB - Manual (Page 40)

mAI085-MB Actuator Interface Technical Manual /36
Distributive Intelligence
 CMC INDUSTRIAL ELECTRONICS LTD
4. Set the communications port settings as shown and then click OK. The settings are
Bits per second - 9600, Data bits - 8, Parity - None, Stop bits -1, Flow control -
None;
5. On some computers it may be necessary to add a short delay to each transmitted
character when uploading configurations to the mTI085. From the File menu in
HyperTerminal, select Properties. On the next screen select the Settings tab. On the
next screen click the ASCII Setup button. Set the Character delay field to 2
milliseconds and then click OK;