Vertical Communications 8024S - Manual (Page 23)

Caller ID (Automatic Number Identification)
The number of the calling party will be displayed if your telephone has been
assigned Caller ID service and you have one of the following:
· Lines that ring audibly at your station.
· Lines that ring audibly at another station that you answer with call pickup.
· Lines that are transferred to your station.
Incoming call numbers are displayed in the upper half of the LCD. If caller’s name is
available, it is displayed in the lower half of the LCD. If another call rings in while
on a incoming call, the second caller’s number flashes on the LCD for five seconds.
· To dial the number of the last incoming call while on an active
call,
1. PRESS
HOLD.
2. PRESS programmed SAVED NUMBER REDIAL button. (See
Feature Buttons section on page 50 for programming.)
LCD Speakerphone Station User’s Guide 15
GCA70-281 Answering Calls