Vertical Communications 8024S - Manual (Page 68)

Tracker Paging System
When installed with your system, the Tracker Paging System option allows you to
send call back and parked call messages to Tracker pagers assigned to station
extension numbers. Along with the parked call message, the system parks the call in
orbit for retrieval by the paged party. The type of message that the system delivers
(either alphanumeric or numeric-only) is dependent upon the Tracker pager model
in use at the station.
When outside callers call into a system that has both a Tracker Paging option and a
voice mail option installed, the system gives these callers the option of either leaving
a message or tracking the person that they are calling.
· To enable a Tracker Pager at your station,
1. PRESS
INTERCOM.
2. DIAL
*06
.
· To disable a Tracker Pager at your station,
1. PRESS
INTERCOM.
2. DIAL
#06
.
· To send a call back message to someone’s Tracker Pager
after receiving a ring no answer,
1. MAKE an intercom call to someone and receive no answer.
2. PRESS programmed TRACK button OR DIAL
#01
.
3. After your station returns to idle* hang up handset or press
SPEAKER to end. The Tracker Pager system will transmit your
station extension number to called party’s Tracker Pager display.
(Some models will also display your station name if the system is
programmed to include station names.)
* If the Tracker paging system does not accept your actions, an error tone will sound at your telephone.
60 LCD Speakerphone Station User’s Guide
Other Features GCA70-281