Vertical Communications 8024S User Manual
Page 71
·
Program the auxiliary jack enable/disable buttons (at any
blank programmable button location) as follows:
1. PRESS
INTERCOM.
2. DIAL
**1
.
3. PRESS programmable button.
4. DIAL a feature code:
•
94
= Headset Button,
•
95
= External Ringer Button,
•
96
= Tape Recorder Button,
•
97
= External Pager Button.
5. PRESS
TRNS/CONF.
6. REPEATEDLY PRESS programmable button AND DIAL
separate codes until all four buttons are programmed, OR PRESS
SPEAKER to end.
·
To use an auxiliary jack feature button,
1. PRESS desired button to enable mode. The display denotes the
feature and shows it to be enabled.
To disable any active mode, press the corresponding feature button to alternate off.
CAUTION
With the exception of a headset microphone, do not connect the audio output
of any external device to the auxiliary jack. Also, do not connect the tip and
ring leads of a telephone line to the auxiliary jack. Do not connect any de-
vices to the auxiliary jack other than those mentioned above.
LCD Speakerphone Station User’s Guide
63
GCA70-281
Other Features