Vertical Communications 8024S - Manual (Page 97)

Screened Call Transfer
Allows users to first announce and then transfer both line and intercom calls from
one station or group to another.
Service Observing
Class of service programming option allows users to enter an in-progress call in an
unannounced muted mode to monitor the call.
Speed Dialing
Autodialing using the keypad buttons. Speed dialing can be station calls (personal
and accessed by only one specific user) or system calls (numbers used and accessed
by anyone in the system).
Station
A single system telephone with an individual identity and feature set assigned by the
programmer.
Station Message Detail Accounting (SMDA)
Station message detail accounting provides a record of the incoming and outgoing
calls handled by the system on selected lines. This record provides information for
accounting and traffic analysis studies.
Subdued Off-Hook Voice Announce (SOHVA)
A private announcement that can be made to a busy party which they hear through
the receiver of their handset.
System Alarm Reporting
Allows you to view (through the LCD telephone screen) the various system alarms
and the stations with which those alarms are associated.
System Speed Dial
System speed dialing provides system users with a repertory of up to 500 numbers
that they can dial from any telephone in the system. The installer or the attendant is
responsible for storing the system speed dial numbers.
T
TAP (Flash/Recall)
Depending on your system’s programming, this button gives you a fresh dial tone or
activates a hookflash.
Toll Restriction
Class of service feature by which the system allows or denies outgoing calls to
selected users over selected lines.
Tone Call
A ringing intercom call.
LCD Speakerphone Station User’s Guide 89
GCA70-281 Glossary