COBY electronic 5.1 Channel Home Theater DVD System DVD938 - Manual (Page 14)

Page 14 Coby Electronics Corporation
En
gli
sh
www.cobyusa.com Page 15
Name Description
1 Power/Standby Turn the unit on or off (standby). The Main Power switch on the
rear panel must be set to the ON position.
2 Open/Close Open or close the disc compartment tray.
3 Numeric Keypad <0-9, 10>: Use the numeric keypad to input numbers where ap-
propriate.
<+10>: Add 10 to input numbers higher than 10. For example,
press <+10> twice and then press <5> to input the number “25”.
4 GOTO Enter Direct Access mode to go to a specific part of a movie.
5 SETUP Enter the main setup menu of the unit.
6 SOURCE Change the source input mode of the unit (e.g., DVD-VIDEO, LINE,
TUNER).
7 USB Change the source input mode between DVD, USB, and CARD. Press
<SOURCE> to place the unit in DVD mode first to access the USB
and memory card source modes.
8 A-MODE Toggle the audio mode between STEREO OUPUT and 5.1 CHANNEL
OUTPUT.
9 PLAY/PAUSE Play or pause the disc.
10 V-MODE Change the video output mode of the unit to match the video con-
nection used. Select CVBS for 480i composite video, YUV for 480i
component video, or P-YUV for 480p component video.
11 PROG Enter Program mode to create a custom playlist.
12 STOP Press once to stop disc playback. The player will save and resume
playback from the stop location.
Press twice to stop disc playback completely. The player will
resume playback from the beginning of the disc.
13 OSD Toggle on-screen information display.
VOL+ Increase the volume level.
DVD938 at a Glance