COBY electronic 5.1 Channel Home Theater DVD System DVD938 - Manual (Page 27)

Page 26 Coby Electronics Corporation www.cobyusa.com Page 27
En
gli
sh
Audio will be muted during fast-forward, fast-reverse, and
stepped playback.
Repeat Playback
Press <REPEAT> to change the repeat playback mode. 
Adjusting the Sound
Press <VOL +> to increase the volume level. 
Press <VOL –> to decrease the volume level. 
Press <MUTE> to turn the volume off completely. Press <MUTE> 
again to restore the volume to the previous level.
Press <A-MODE> to change toggle between audio output modes

(5.1-channel surround and 2-channel stereo).
Press <CH-LEVEL> to select an audio channel to adjust (e.g., front,

rear, center) and then use the <VOL +>/<VOL –> keys to adjust the
selected level.
Press <TONE> to select BASS or TREBLE and then use the <VOL +> /

<VOL –> keys to adjust the selected tone.
Press <S.EFFECT> to change the sound effects mode. Set the sound

effects mode to off when playing a Dolby 5.1-channel disc to avoid
interference with Dolby Digital decoding.
Getting Started