Load a disc (or other media), Basic playback instructions, Getting started – COBY electronic 5.1 Channel Home Theater DVD System DVD938 User Manual
Page 25
Page 24
Coby Electronics Corporation
www.cobyusa.com
Page 25
En
gli
sh
Press <USB> to switch between Memory Card, USB, and DVD modes.
Select Memory Card to play media from memory cards loaded in
the Card Slot (SD, Memory Stick, or MMC).
Select USB to play media from USB flash memory drives loaded
in the USB Port.
Select DVD mode to play optical discs (e.g., DVD, CD, or CD+G)
from the disc tray.
The unit must be placed in DVD mode before the Memory Card
and USB modes can be accessed. Press <SOURCE> to switch to
DVD mode first, then press <USB> on the remote to change be-
tween Memory Card, USB, and DVD/Disc modes.
Load a Disc (or other media)
Press <OPEN/CLOSE> to open the disc tray. Insert a disc with the label-
side up. Press <OPEN/CLOSE> again to close the disc tray.
If a single-sided disc is inserted upside-down, the unit will display
“NO DISC” or “BAD DISC”.
To play from media other than a disc, insert a memory card or
USB flash drive, then press <USB> on the remote to change be-
tween Memory Card, USB, and DVD/Disc modes.
Basic Playback Instructions
Press <PLAY/PAUSE> to start playback.
Some discs may start playing automatically or display a DVD menu
specific to the disc. If a menu appears, use the <Navigation Keypad> to
select a desired feature or option and then press <ENTER> to confirm.
Getting Started