Power supply & installation, Power supply, Power management – COBY electronic 5.1 Channel Home Theater DVD System DVD938 User Manual
Page 22: Connections
Page 22
Coby Electronics Corporation
En
gli
sh
www.cobyusa.com
Page 23
After this connection has been made, press <SOURCE> on the remote to
switch to “LINE” mode to enjoy audio from the external device.
Depending on the type of patch cable used, you can use this
connection with external devices with a 3.5mm stereo output
jack or RCA stereo output jacks.
Please refer to the documentation included with your external
audio system for further help using this connection.
Power Supply & Installation
Power Supply
Plug the power cord of this unit into an AC 100-240V 50/60Hz wall outlet,
only. Make all video, speaker, and audio connections before con-
necting the power.
Do not connect the power plug to a power outlet other than that
which is indicated here and on the rating label as this may result
in the risk of fire or electric shock.
Do not handle the power plug with wet hands. Doing so may
cause electric shock.
Power Management
If the unit will not be in use for a long period of time, turn the unit off
and unplug it from the AC power supply, and remove the batteries from
the remote control.
Connections