Dolby digital setup, Channel delay, System setup – COBY electronic 5.1 Channel Home Theater DVD System DVD938 User Manual
Page 40
Page 40
Coby Electronics Corporation
En
gli
sh
www.cobyusa.com
Page 41
Dolby Digital Setup
Dual Mono
STEREO: The player outputs the left-channel audio and right-channel
audio via the FL and FR speaker respectively.
L-MONO: The player outputs the left-channel audio only via both the
FL and FR speaker.
R-MONO: The player outputs the right-channel audio only via both
the FL and FR speaker.
MIX-MONO: The player outputs the average signal of the left-chan-
nel and right channel audio via the FL speaker and the FR speaker.
This function only applies to Dolby AC -3 and 2-channel encoded
discs.
Dynamic
When you watch films with large dynamic audio range at low volume (at
night, for example) you can increase the dynamic value to avoid losing
sonic detail resulting from the low volume.
Channel Delay
Set the delay time for the center, rear speakers and the subwoofer.
You may need to set a delay to compensate for the difference in audio
propagation times caused by the distance of the speakers to the listener.
Use the navigation keys <UP> or <DOWN> to select a speaker, then use
the navigation keys <LEFT> or <RIGHT> to adjust the distance differential.
System Setup