COBY electronic 5.1 Channel Home Theater DVD System DVD938 - Manual (Page 19)

Page 18 Coby Electronics Corporation www.cobyusa.com Page 19
En
gli
sh
Connections
Audio System
Choose the best available audio connection. Avoid using more than one
connection at the same time to prevent signal interference. The audio
settings of the unit must match the audio connection used. Change the
audio settings in the System Setup menu (please refer to the System
Setup section of this manual for more information).
Speakers
This unit has an integrated amplifier. Connect the supplied speakers to
enjoy your movies with 5.1-channel surround sound!
If necessary, strip 3/8” (10 mm) of insulation from each end of the 1.
speaker wire.
While pressing the terminal levers of each speaker, insert the bare
2.
wire into the hole, then release the lever to secure the connection.