KERN & SOHN SFB 300K-1LM - Manual (Page 28)

SFB-BA-e-1324 28
7 Operation
7.1 Start-up
 Press , and the instrument will carry out a self-test. The instrument is ready
for weighing when a weight display appears.
7.2 Switching Off
 Press
until the display disappears.
7.3 Zeroing
Resetting to zero corrects the influence of light soiling on the weighing plate.
Resetting range ± 2 % max.
The instrument comprises an automatic zero setting function, however, the
instrument can be reset to zero whenever needed as described below.
 Remove load from weighing system
 Press , and the zero display as well as the ZERO indicator will appear.
7.4 Simple weighing
 Place goods to be weighed on balance.
 Wait for stability display
STABLE .
 Read weighing result.
Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus
a possibly existing tare load, must be strictly avoided. The instrument may be
damaged by overloading.
Exceeding of maximum load is indicated by “----“ as well as a signal sound.
Remove load from weighing system or reduce preload.