KERN & SOHN SFB 300K-1LM - Manual (Page 35)

SFB-BA-e-1324 35
7.8 Manual totalizing
With this function the individual weighing values are added into the summation
memory by pressing and edited, when an optional printer is connected.
Menu settings:
„P1 COM“ or „P2 COM“  „MODE“  „PR2““, see chap. 8
The totalisation function is not active when the weight is under 20d.
Add up:
 Place goods to be weighed A.
Wait until the stability display STABLE appears, then press . The weight value
will be saved and a printout received if an optional printer is connected.
 Remove the weighed good. More weighed goods can only be added when the
display = zero.
 Place goods to be weighed B.
Wait until the stability display appears, then press . The weight value will be
added to the summation memory and possibly printed. The number of weighing
processes followed by the total weight will be shown for 2 sec.
 Add more weighed goods as described before.
Please note that the weighing system must be unloaded between the individual
weighing procedures.
 This process may be repeated 99 times or till such time as the capacity of the
weighing system has been exhausted.
Display and output sum „Total“:
 Press and the number of weighings followed by the total weight will be
shown for 2 sec. To receive a printout, press during this display.