KERN & SOHN KFN-TM - Manual (Page 28)

28 KFB/KFN-TM-BA_IA-e-1323
7.7.1 Tolerance check for target weight
Settings

Press and at the same time in weighing mode.


Press until the display for entering the lower limit value
appears.

Press , the current setting will be displayed.

To enter the lower limit, e. g. 1000 Kg, press the navigation
keys (See chap. 2.1.1); the currently enabled digit will be
flashing.

Confirm input by .

Press repeatedly until is displayed.

Press , the current setting for the upper limit will be
displayed.

Press the navigation keys (See chap. 2.1.1) to enter the
upper limit, e.g. 1,100 kg; the currently enabled digit will be
flashing.

Confirm input by .

Press repeatedly until is displayed.

Press and the current setting for the acoustic signal will
be shown.

Select desired setting (no, ok, ng) by .

Confirm input by .