KERN & SOHN KFN-TM - Manual (Page 36)

36 KFB/KFN-TM-BA_IA-e-1323
7.11 Animal weighing
The animal weighing function is suitable for weighing restless loads.
The weighing system will display a mean value derived from several weighing results.
The animal weighing program can be enabled by either calling up menu block
„P3 OTH“ or „P4 OTH“
 „ANM“  „ON“ (See chap. 8) or faster via key combination.
The indicator shows HOLD as long as the animal weighing function remains enabled.

Place the load on the weighing system and wait until the scale is steady.

Press and at the same time; you will hear an acoustic signal, indicating
that the animal weighing function is enabled.
Whilst averaging is taking place you can add or remove loads as the measuring
value will be constantly updated.

To deactivate the animal weighing function press and at the same time.