2 tolerance check for target quantity – KERN & SOHN KFN-TM User Manual
Page 30
30
KFB/KFN-TM-BA_IA-e-1323
7.7.2
Tolerance check for target quantity
Settings
Press
and
at the same time in weighing mode.
Press
until the display for entering the lower limit value
appears.
Press
, the current setting will be displayed.
To enter the lower limit, e. g. 75 items, press the navigation
buttons (see chap. 2.1.1); the currently enabled digit will be
flashing.
Confirm input by
.
Press
repeatedly until
is displayed.
Press
, the current setting for the upper limit will be
displayed.
To enter the upper limit, e. g. 100 items, press the navigation
buttons (see chap. 2.1.1); the currently enabled digit will be
flashing.
Confirm input by
.
Press
repeatedly until
is displayed.
Press and the current setting for the acoustic signal will
be shown.
Select desired setting (no, ok, ng) by
.
Confirm input by
.