KERN & SOHN KFN-TM - Manual (Page 39)

KFB/KFN-TM-BA_IA-e-1323 39
8 Menu
The application of the display unit as a verified weighing system requires that you
short-circuit the two contacts [K1] of the circuit board, using a jumper. To that effect,
a menu for verified weighing systems is available. For menu layout see chap. 8.2.
There is no jumper for weighing systems that cannot be verified. To that effect, a
menu is available for weighing systems that cannot be verified, Menu layout
see chap. 8.1
Navigation in the menu:
Call up menu

Switch-on balance and during the selftest press .

Press , , subsequently, the first menu
block „PO CHK“ will be displayed.
Select menu block

With help of , the individual menu items can be
selected one after the other.
Select setting

Confirm selected menu item by pressing . The
current setting will be displayed.
Change settings

To change to the available settings, press the
navigations keys as described in chap. 2.1.
Acknowledge setting /
exit the menu

Either save by pressing or cancel by pressing .
Return to weighing
mode

Press repeatedly to exit menu.